Introduction: Hello everyone, after the violent 3,000 times of continuous power-off test in the second phase, we immediately carried out 3,000 automatic restart tests and continued to challenge Western Digital, Samsung, Toshiba and Intel's four international first-line SSDs. performance!
Hello everyone, after the second phase of 3,000 consecutive power outage tests, we immediately carried out 3,000 automatic restart tests and continued to challenge Western Digital, Samsung, Toshiba and Intel's four international first-line SSDs. Performance! I believe that every day, power on and off is the most common way to use the computer, and it is also one of the busiest moments of the solid state drive. There are a large number of centralized hard disk read and write. Of course, automated test software will replace people to perform such cumbersome and time-consuming tests. If the highest difficulty is 5 points, the difficulty of this test will not exceed 1, and even if the normal switch machine can not work stably, the name is called a USB flash drive. But this time we are carrying out continuous uninterrupted 3,000 tests for a long time! Can that be greatly increased?
Select Reboot to restart the test in PassMark Rebooter, set the number of automatic login and test cycles, click Start Cycle to start the test. Rebooter also supports running a specific program automatically after each boot to enrich the test content: for example, using an IOMeter script and 4K video to perform a specific write after each boot, and then restarting after a delay of several seconds.
Shandle has performed 3,000 automatic restart tests on 16 solid-state hard disks of four major brands (Samsung, Toshiba, Western Digital, Intel), and the cumulative number of power-on wake-ups has reached 3,000 times, after a week or so. After the end of the test, the results of the monitoring and the results reported that 16 SSDs can operate normally without any mistakes. It’s not a vain name!
Of course, as an international brand original solid-state hard drive, test verification like this has certainly been carried out more and more in the development stage, here is just to introduce some test directions of firmware robustness.This article was written by the author of the cutting-edge technology. The views represent only the author and do not represent the OFweek position. If you have any infringement or other problems, please contact us.